Post-authentication command injection in NETGEAR RAXE450 and RAXE500 routers

Note: This data is for reference and cybersecurity research purposes only.CyStack advises users not to use this information for unlawful purposes.

What is CVE-2026-62656?

CVE-2026-62656 is a vulnerability classified as Improper Input Validation, affecting RAXE450 (affected versions: < V1.2.14.114) and RAXE500 (affected versions: < V1.2.14.114). This vulnerability is rated Medium, with a CVSS score of 5.4. Current sources do not report this vulnerability as exploited.

Overview

Original source data

A security flaw was found in certain NETGEAR RAX models that could allow a logged-in user to send specially crafted requests to the router and run unauthorized commands. This could enable the user to make unauthorized changes to the router and affect its security and operation.

Affected products and scope

  • NETGEAR RAXE450: versions less than V1.2.14.114 are marked affected. NETGEAR lists V1.2.14.114 as fixed.
  • NETGEAR RAXE500: versions less than V1.2.14.114 are marked affected. NETGEAR lists V1.2.14.114 as fixed.

The normalized record sets the default status to unaffected and explicitly identifies only the affected ranges above. Later or parallel release branches are not separately characterized by the available evidence.

Technical details

NETGEAR describes a post-authentication command injection issue in RAXE450 and RAXE500. The attacker-controlled input is a specially crafted request sent to the router by a logged-in user. The supplied weakness classification is CWE-20, Improper input validation, indicating that request data is not adequately constrained before it reaches command handling. The supplied assessment classifies reachability as adjacent, with low complexity, high privileges required, and no user interaction. Successful exploitation can execute unauthorized commands and enable unauthorized router changes. The advisory does not identify the endpoint, parameter, parser, command construction, or exact firmware subsystem, so those implementation details remain unknown.

Exploitability

The attack is classified as reachable through an adjacent path, so the attacker must be able to reach the router through the relevant adjacent network path. Authentication is required and high privileges are required; no additional user interaction is needed, and the assessed complexity is low. The record does not establish whether the affected interface is limited to the LAN or reachable through another adjacent path, and it does not identify an endpoint or request format. The supplied data marks public exploit as false. It does not provide a confirmed exploitation status, campaign, victim, or specific indicator.

Technical impact

The technical outcome is unauthorized command execution in the router context, followed by possible modification of router settings or behavior. The documented security consequence is loss of integrity: an attacker who already has the required privileges may change router state without authorization. These changes could affect security controls or normal operation, but the record does not establish specific settings, persistence, data access, or service disruption. Confidentiality and availability impacts are not indicated in the supplied assessment. Organizational response may include validating administrative access, reviewing configuration integrity, and restoring trusted settings if unauthorized changes are found.

Business impact

The primary documented consequence is unauthorized modification of router state or configuration. This reduces configuration integrity and may weaken security settings or affect the device's intended operation. If a sufficiently privileged account is misused, the documented command execution could increase the scope of unauthorized changes. The supplied assessment does not indicate confidentiality or availability impact, and it does not establish a breach or specific outage.

Remediation

  1. Update NETGEAR RAXE450 to exactly V1.2.14.114.
  2. Update NETGEAR RAXE500 to exactly V1.2.14.114.
  3. If automatic updates are enabled, verify the actual firmware on each device rather than assuming that the patch was installed.
  4. If the installed version cannot be verified, use NETGEAR support guidance for the specific model to check and update the firmware.
  5. The record provides no separate workaround beyond firmware updating. Automatic update status should not replace version verification.

Detection

  1. Inventory NETGEAR devices and identify RAXE450 and RAXE500 routers in the environment.
  2. Read the installed firmware on each device and compare it with the confirmed releases listed in remediation.
  3. Check automatic update status. Devices with automatic updates enabled may already have received the patch, but the installed version still needs to be verified.
  4. Review router administration settings for unauthorized changes. This is a precautionary check, not a vendor-confirmed indicator.
  5. If administration or audit logs are available, review them for unusual login and configuration-change activity. The advisory does not name a specific log event, endpoint, or IOC, so absence of log evidence does not prove that a device is safe.
Sources (16)
Learn more

Run an in-depth assessment with complete web risk management

CyStack VulnScan continuously discovers assets, validates vulnerabilities, and helps security teams prioritize remediation across the organization.