CWE-1300: Improper Protection of Physical Side Channels

CWE-1300 là gì?

CWE-1300 là Improper Protection of Physical Side Channels. Lỗi phát sinh khi the device does not contain sufficient protection mechanisms to prevent physical side channels from exposing sensitive information due to patterns in physically observable phenomena such as variations in power consumption, electromagnetic emissions (EME), or acoustic emissions. Hiện có 10 lỗ hổng trong kho dữ liệu liên quan đến CWE-1300 và không có lỗ hổng nào nằm trong danh mục khai thác thực tế của CISA.

Thứ hạng OWASP Top 10-
Tổng số CVE liên quan (365 ngày)10
Mức trừu tượngCơ bản
Khả năng khai thác-

Số lượng lỗ hổng nằm trong CWE-1300

10 lỗ hổng

Không có dữ liệu

Chưa có dữ liệu về lỗ hổng trong CISA KEV cho CWE-1300

Định nghĩa chính thức

TheoMitre CWE

Đặc điểm

Dữ liệu MITRE CWE chính thức

Giai đoạn hình thành

  • Hiện thực hóa

Hậu quả thường gặp

Dữ liệu MITRE CWE chính thức
Tác độngPhạm viDiễn giải
Đọc bộ nhớ, Đọc dữ liệu ứng dụngTính bí mậtAn adversary could monitor and measure physical phenomena to detect patterns and make inferences, even if it is not possible to extract the information in the digital domain.

Biện pháp giảm thiểu rủi ro

Dữ liệu MITRE CWE chính thức
  1. Kiến trúc và thiết kếApply blinding or masking techniques to implementations of cryptographic algorithms.
  2. Hiện thực hóaAdd shielding or tamper-resistant protections to the device to increase the difficulty of obtaining measurements of the side-channel.

Cách phát hiện trong hệ thống

Dữ liệu MITRE CWE chính thức
Phương phápCách làmHiệu quả
Phân tích thủ côngPerform a set of leakage detection tests such as the procedure outlined in the Test Vector Leakage Assessment (TVLA) test requirements for AES [REF-1230]. TVLA is the basis for the ISO standard 17825 [REF-1229]. A separate methodology is provided by [REF-1228]. Note that sole reliance on this method might not yield expected results [REF-1239] [REF-1240].Khá
Phân tích thủ côngPost-silicon, perform full side-channel attacks (penetration testing) covering as many known leakage models as possible against test code.Khá
Phân tích thủ côngPre-silicon - while the aforementioned TVLA methods can be performed post-silicon, models of device power consumption or other physical emanations can be built from information present at various stages of the hardware design process before fabrication. TVLA or known side-channel attacks can be applied to these simulated traces and countermeasures applied before tape-out. Academic research in this field includes [REF-1231] [REF-1232] [REF-1233].Khá

Lỗ hổng điển hình

Nguồn (2)

CWE™ Program, operated by The MITRE Corporation. Copyright © 2006–2026, The MITRE Corporation. The MITRE Corporation hereby grants you a non-exclusive, royalty-free license to use CWE for research, development, and commercial purposes. CWE Terms of Use.

Tìm hiểu thêm

Kiểm tra chuyên sâu cùng giải pháp quản lý rủi ro Web toàn diện

Giải pháp CyStack VulnScan liên tục phát hiện tài sản, xác minh lỗ hổng và giúp đội ngũ bảo mật ưu tiên khắc phục cho toàn bộ doanh nghiệp.